The Basics And Importance Of Calibration

By: Low Jeremy

Calibration is one process that is done in almost all industries, be it publishing, medical, or commercial. Unfortunately, calibrating is such a technical term that not all people know that it is actually being done even in their own homes.

Calibration is the process of checking machines and making sure that values used in measurements remain at standard points. It is the process of verifying a machines work and performance within a set of specifications.

When done the right way, calibration can make your life easier and better. It allows for faster processes and of course with lesser errors and mistakes. During calibration, it is also important to make sure that the measurements taken during the period is also valid. Remember that whatever values that you have gotten during the calibration process are the values that are accepted to be the most accurate and precise.

Problems however arise when the calibration service is not done correctly. This is frequently what happens when a low cost service is purchased. It is important that you get a good service especially if your company is operating under a standardized quality system like that of the ISO 9000.

The implementation in fact of the ISO 9000 became one of the primary reasons why calibration software is so popular. In order to operate within the set standards, one need to regularly check the machines and networks that are being used.

Calibration is based on the data that has been collated and gathered by experts in the fields. Often, these data came from experiments, studies and projects which required calibration. The many data supporting the process is the reason why calibrating standards have long been established.

When calibrated, a machine or a system is compared against another machine whose values have already been standardized and established. The larger the base that was used in the calibration, the better and wider will be the chances of the inaccurate values to be replaced and readjusted. The introduction of newer and more sophisticated models only serve to refine the standard.

One of the wonders that people have discovered in the world of science and measurements is calibration. Often referred to as the process of verifying and determining the relationship between the output and the response of measuring instrument to the value of the input quantity, calibration is known as a measurement standard.

For non-specialized use, calibration involves the entire process of adjusting the output/result or the indication on a measurement instrument to correlate with the value of the applied standard within the boundary of specific accuracy.

WHY USE CALIBRATION?

In more modern and scientific language, calibration is referred to the natural process of transition that is used to measure accuracy and comparison of a measuring instrument that has a standard to determine the possible errors in a specific scale.

Today, calibration is basically used for the process of manufacturing so less and less possible mistakes and errors can be made. This process or measuring apparatus is also used to lower the cost of manufacture or possible production by determining or ensuring the quality.
Calibration is also ideal in minimizing possible errors because it uses scientific method to determine impending miscalculations while doing something to correct the errors if there were any. Calibration becomes more and more popular to companies because the method aims to economize time, labor, and other resources in any production by means of accurate verification.

If there were one industry that benefits a lot in the discovery and utilization of calibration, that would be the numerous laboratories all over the world that conduct seemingly endless and continuous research. The researcher or the tasked observer usually uses this measuring apparatus to refine his or her work.

Calibration is also greatly beneficial to a researcher is he or she doesn't the time to develop his/her own apparatus due to lack of time and he/she needs a set of methods for accurate testing.

Aside from the field of research laboratories, calibration is also extremely beneficial because it makes the construction of instruments that are capable of measuring with sufficient precision and lesser probability to ensure correction.

Considered as the actual accuracy of a scale or balance, calibration is widely used in testing the products to get their accurate weight. In the United States alone, an agency called National Institute of Standards and Technology that is tasked to maintain standards for values of SI units and industrial standards, calibration has become a helpful tool in providing the traceability of their subjects of study by adhering to the basic standards of calibration.

Top Searches on
Electronics
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 

» More on Electronics
 



Share this article :
Click to see more related articles