The invention of the plastic-lined nipple is the result of the unfortunate situation between steel and copper. Steel and copper do not get along. When copper or brass touch steel, the steel will rust and corrode but the copper or brass will not. When it comes to water heater's and plumbing, this can be a problem. A water heater's tank is made of steel and many plumbing lines are made out of copper. If your water heater is brand new and was installed with copper lines running directly to it, check to see if corrosion or rusting has occurred on the water heater. It probably has not, but if it has, having some plastic-lined nipples installed would be of great value to the water heater in the future.
If you are handy with plumbing, you can install gate valves on your hot and cold lines on top of your water heater. Use brass valves and install them into plastic-lined nipples instead of directly into steel plumbing. Don't attach copper or brass directly to steel or the steel will corrode and rust. This will allow you to have positive control of your water lines at the water heater itself.
Heat traps can be used where the plastic-lined nipples are installed. Hire a plumber to do this to increase the water heater's efficiency. Make sure adapters are attached to the copper plumbing. If the water heater has a combination anode rod inside, the plastic-lined nipple will still be important. Install a plastic-lined one if at all possible. If you have a curved dip tube installed inside your water heater, you will need a three inch long plastic-lined nipple as well.
The easiest method of adding plastic-lined nipples if you have steel plumbing is as follows: Attach to both the hot and cold lines a plastic-lined nipple where the lines protrude from the wall. Attach to both of the hot and cold lines another set of plastic-lined nipples where the lines connect to the water heater. Use copper flex-connectors to connect the hot line from the wall to the water heater and do the same for the cold line. Heat traps should be installed to your plumbing lines for increased heating efficiency and to keep the water in the lines warmer.
Plastic-lined nipples may also be installed on the T&P valve. A lack of corrosion or rusting will keep the T&P working properly without getting any trapped water inside. This is not essential, but it can help.
Some of us have a security system in our house which informs us if there is an intruder in our home. Nearly all of us have smoke alarms installed on the ceilings of each room in our home to warn us if there is smoke from fire. We additionally have carbon monoxide sensors to alarm us if there is an issue with the natural gas in the home. People don't know that there are flood sensors that can be placed in our place to alert us if there is water amassing in the house. This can help us in avoiding a lot of water damage by arousing us before the water has time to become a big problem. These flood detectors would be especially helpful in warning the homeowner when a gadget has started to leak or a tub overflows.
Flood sensors can afford occupants of a home peace of mind when they are away on a trip much like a security system. Several flood sensors can be attached to the alarm of the home protection system. They can be programmed to have the warning sound for even days if there is something not right. This will certainly get the notice of the neighborhood if you are out of town when a flood happens. Many of the systems will make you aware that there is an issue through the pager you have with you. You can notify a water damage restoration pro to go to the house and mend the difficulty speedily which very much decreases the water damage that will happen.
There are several things you should think about when searching to buy a flood sensing system. Try to get one that has a great track record for dependability. Check a shopper's publication or go online to find what other people are saying regarding the system you are thinking about. If you by this time have a protection system installed, you may choose to be on the lookout for a flood sensor system that can be supplemented to the alarm system that you already have.
It is necessary to find flood sensors that are effective. They need to let you know immediately when flooding starts or there is no point to having the sensors. It is a great plan to find flood sensors that are sensitive enough to notice water below carpeting. These sensors can be mounted on gummed strips under the carpet.
It is key that the flood sensors are extremely protective. You should get sensors for the kitchen, washing room, basement, and right exterior to the restrooms in your home. These flood sensors should be able to be coupled with one primary alarm. This will get the system to be much more competent.
With all the flooding that has occurred across the region in the last years, installing flood sensors is wise. Having them in your place may qualify you for a a decrease on your flood insurance policy. The financial outlay you make in the flooding sensors will be made back in the savings because of the early sensing of water in your habitation.
Both John Haynes & Evie Parrish are contributors for EditorialToday. The above articles have been edited for relevancy and timeliness. All write-ups, reviews, tips and guides published by EditorialToday.com and its partners or affiliates are for informational purposes only. They should not be used for any legal or any other type of advice. We do not endorse any author, contributor, writer or article posted by our team.
Evie Parrish has sinced written about articles on various topics from Home, Oral Hygiene and Home. Evie Parrish researches restoration items for homeowners for water damage restoration and. Evie Parrish's top article generates over 49500 views. Bookmark Evie Parrish to your Favourites.