Isn't it lovely to receive lots of Christmas cards? But it's not so easy to display them all. They have a tendency to get blown off the windowsills and ledges. They curl up in the heat and spoil the decor if you pin or Sellotape them to the walls and doors. A Christmas card tree can hold multiple cards securely and decoratively.
To make a Christmas card tree you will need...
A baked bean tin (washed and the top filled) around 200g of decorators all-purpose interior filler, 15 or so bamboo skewers, paint, tinsel, super glue, paint suitable for painting on metal and wood, mini pegs and sand paper.
Mix up the filler with water as directed on the packet and pour the plaster like mixture into the tin. When the filler starts to go off, push the skewers into the filler in all directions bearing in mind that each stick will hold card. Space them out around the tin.
Instead of using skewers, you could try using largish twigs; this would give your Christmas card tree a more natural and rustic look.
Leave to one side to completely dry.
It's time to paint the structure. Paint in any colour, making sure you pain the tin, sticks and filler and all. If you are going to use spray paint it is important to follow the instructions carefully on the side of the tin.
Leave to one side to completely dry.
Before sticking the pegs to the skewers you will need to give the skewer a rub with sandpaper to remove some paint and to give the glue something to attach itself to. Just sand a space the size of the peg.
Put a small amount of super glue to one side of the peg, and with the jaws of the peg facing sky wards carefully stick the peg to the stick. Making sure that you don't also stick your fingers to the stick.
You may want to put two pegs on some sticks for smaller cards. Add a second peg just above half way down the stick in the same way as before.
Finally to finish off your Christmas card tree, wrap a length of tinsel around the tin. Stick the ends of the tinsel in place with a dab of glue. Add your Christmas cards by putting a card in the jaws of each peg.
