Considerations to Make Before Buying Bmx Bicycles Parts

By: Muna wa Wanjiru

The BMX is an adventure sport and the BMX bikes are made according to the requirements for it. In this sport the bikes have to undergo extreme conditions of stress and strains and therefore the parts of these bikes should have sufficient strength in order to measure upto such extreme conditions. Though, the parts of the BMX bikes are similar to the common bikes there are some differences in their features.

All the parts of the BMX bikes have been designed so as to be light weight and in addition to this they also provide good strength. The parts as the seats or the pads and paddles should not be slippery and they user should feel comfortable while he is making use of them.

However, as these bikes have to bear extreme conditions of stress and strain some of their parts get damaged after using them for sometime. Therefore, various spare parts are available in the market. So that whenever you find the need to replace them you can easily get the parts.

The first thing that needs replacement after its use for sometime is the tire. You can get the BMX tires from the market. However you should remember that these tires should be broad ideally 20 inches, and they should have good grip on the ground. This is very important as in the BMX racing the danger that of the slipping of the racers is very high. In addition to this they tires should have tough rubber so that they will last for sometime. Or else they may burst due to the pressure when the rider jumps and lands on the ground.

Sometimes the need of replacing the complete tire can also occur. They are also available in the market. Before buying them you should take in to consideration that are made from good and rust proof metal. The spokes should have sufficient thickness. You will also find them as spare. The hub and the wheels should be good rotating.

The breaks are also the parts that get damaged after sometime. It is better to use the vertical pulling breaks for the BMX bikes. These breaks should have good pads so that they hold the rim efficiently. And in addition to this they also have to be strong enough. Otherwise there is always a danger that the pads may come out. The liver that pushes the pads on to the rim should have proper shape and therefore it should be efficient in pushing the pads in direct proportion to the applied pressure.

The next part that may need a replacement is the seat. As for the BMX racing the rider's body is not able to remain in a constant position during the race the seats have to bear some pressure as the rider depends on them for remaining in one position. While replacing them you should remember that their shape should provide good support to the rider and they should also have good padding for his comfort.
These are some of the important parts that often need replacement. However, the other parts as the pads paddles, bearings and other parts of these bikes would also need replacement after use for sometime.

Top Searches on
Extreme Sports
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 

» More on Extreme Sports