Build Your Own Water Into Hydrogen Converter And Save Money

By: Michael Littles

Want your car or truck to run better, longer while using a cheap source of fuel? If so, then building your own water into hydrogen system is definitely for you.

Hydrogen Fuel is moderately easy to create when you have good clear instructions. Water into fuel or Hydrogen is quickly being looked at as the cheap fuel of the future. The concept of building your own water into hydrogen converter as a source of alternative fuel for your car or truck has becoming quite popular.

The fact that energy can be pulled out of plain water is unbelievable until you see the process work with your very own eyes. Many car and truck owners report a 35-50% gas mileage increase using this free fuel source.

There are many real-life videos the show the proof that Hydrogen can be taken from water and used as a powerful, but cheap fuel source and it can be done safely. The videos have really caught people's attention, mainly because of rising fossil fuel costs and the fear of no end in site to the ever increasing gasoline prices.

The bottom line is that a record number of consumers want to save money on their gasoline costs. The record number of searches posted on Google for the Water 4 Gasoline" manuals shows that many people want to learn more about the hydrogen alternative the "Water For Fuel" system offers.

This increase in the technology is also likely due to the fact that the system is so easy to build. Of course we must also include how much more fuel efficient your car or truck becomes with the "Water 4 Fuel" system installed has to play a major part as well.

Basically, the water for fuel technology is a small system of rubber hoses plugged into a device that converts water directly into hydrogen gas that is then sucked into the fuel system by the tubes or hoses. These fuel cells produce supplemental, clean, cheap fuel and without pollution.

You don't need much to turn your car into a water using hybrid - Just know how. The process involves submerging the electrodes, which is a fancy name for a particular type of coiled wire, into a glass, or heat resistant container of water, attaching that to a battery clip and charging the electrodes with the battery.

This causes the water around the electrodes to split into hydrogen and oxygen (electrolysis). At this point you've created a very cheap source of fuel that you can be used to supplement your gasoline costs.

OK, to have the system installed on your car or truck is slightly more involved, but not complicated at all. For the price of a good how to manual you can build your own water converter in under an hour. The plans and the few parts can cost you as little as $60-$100. The parts you need are commonly found in an auto parts store, hardware store. A very fined tuned system may need a part or two from your local Radio Shack.

Of course, those of us who are not mechanically inclined can lean on a good mechanic to install the parts for us on our car or truck and still get cheap fuel all the same. If you really want a hands off experience you can simply buy the system already assembled and simply plug in the hoses as described by the manual you use.

Although creating hydrogen fuel to turn your car or truck into a water drinking hybrid can be done safely because of the fact the Hydrogen is only extracted from the water in the exact amounts as your car's engine needs.

This is much better than driving around with tanks filled with combustible Hydrogen, which could be dangerous. Though safe to build and use, it is still imperative that you get the best information available to build your own converter the right way. There are plenty of How-To Manuals available to get the job done right.

Top Searches on
Cars
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 

» More on Cars
 



Share this article :
Click to see more related articles