How To Run A Car On Tap Water?

by : Dr.Eswararamanan VR

Many people do not realize they can actually run their car on tap water. Some people are very skeptical about this as it is not widely advertised amongst the media. Some people find themselves asking the ultimate question, will this really work? While it's hard to guarantee it, most people believe that these plans can enable them to make their car run on water. It is known for a fact that a vehicle will run on water. There are a few things you would need to do in order to make your car run on tap water.

First, you need to rest proof your exhaust system. Most of the vehicles that run on water combine water and gas together making it a hybrid vehicle. It would only take a little bit of gas to keep your exhaust system dry so by using both gas and water you would eliminate the need for opening up the head to check the exhaust system. There are a lot of kits that people can buy on the market today that cost just under $200. These kits will allow you to convert your car into running with gas and water.

It is said that this is a much more cost effective way of running your vehicle. You will spend far less in gas than you normally would, plus it is much safer for the ozone as you are not putting out emissions that can harm people. It also allows your fuel system to run much cooler and at a higher power level. This will it prove your mileage performance making it range from 50 to 300 miles per gallon (of water) but it depends on how well you adjust the system.

Since your car would be running by producing H20 or steam which is water vapor and unburned oxygen, it'll be cleaning the environment rather then pumping toxic fumes into it. Any of the excess vapor that does come out turns back into water so you are not harming the environment. So there are many good factors in learning how to run a car with tap water. If this is something that you are considering doing, then you will want to look into getting your own converting kit and see how much money you will save in the gas lines.

The converter Kit will cost you approximately $200. This is a kit you can install yourself so you will not have to pay someone labor to put the kit in for you. You may need to practice a bit to get adjusted just right so that you can maximize your miles per gallon. You will find that the kit will pay for itself in a short period of time with the money you save from not having to buy so much gasoline.

This system is more flexible and user friendly. Even you can turn off the system for a particular period of time. No need to change anything in the engine or computer in your car.