Convert Your Car to Burn Water and Double Your Mileage

by : Corey Bricker

It's very simple. You don't change your engine or computer. A quart-size (95O cc) container is placed somewhere under the hood. You fill it with DISTILLED WATER and a little bit of BAKING SODA. The device gets vacuum and electricity (12 Volts) from the engine, and produces HHO gas (Hydrogen+Oxygen).

The HHO gas is supplied to the engine's intake manifold or carburetor through a tube that inserts into the intake.

The electrical connection is very simple - we have eliminated the need to use relays or any other complications. The device connects to the 12 Volts of your battery via the ignition switch, to prevent hydrogen production when the engine is off. The device is fuse protected and draws very little current, only 1-3 Amps! This could take 10 minutes or less to connect.

Go Here for the Product Link and Customer Reviews:

You will find that these devices are very powerful, but also that each device is simple enough to build in a couple of hours from low-cost hardware. Once you have these "appetizers" in action, and you feel the power of this technology to save fuel in your car or truck, I'm sure you will get the appetite to check out the rest of the technology revealed to you. It will actually be a good idea if you start with this minimum and then grow your Hydrogen-On-Demand system in several easy phases.

The basic components of this system:

Electrolyzer (some call it "Hydrogen Generator"): Our unique design has SPIRAL electrodes rather than plates, thus producing MORE HHO - for LESS energy from the battery. Contained in a quart-size highly durable jar. Looks fragile but it's not! We've never seen any of these jars break or crack, in thousands of miles of day-to-day road tests and I'm still using the same jar from 2006.

MAP Sensor Enhancer: this electronic device reduces fuel consumption without modifying the engine or the computer - an absolute must have for great fuel economy!

Vaporizer: ads water vapor to the engine to cool it down, improves combustion and fuel economy. Also serves as part of the "charged water system" that you will learn about.

Fuel Heater: pre-heats your gasoline for better gas economy, using only energy from the radiator that gets wasted otherwise. Absolutely NO modifications done to the radiator or its hoses!

PCV Enhancer: another great companion to your hydrogen system that improves the PCV (Positive Crankcase Ventilation) function, protects your engine and saves gas.

Fuse holder + wiring. Connect to the 12 volts.

Vacuum T-connector: helps you splice the vacuum line for feeding the hydrogen and oxygen into the engine.

Two vacuum hoses, 3.5 feet each. One connects to the intake manifold, the other to the air filter.

Mechanical installation hardware: Bungee cords, 8" cable straps (for Electrolyzer), 11" cable straps (for Fuel Heater), flex tubing (to protect the wiring harness), and 1/4" vinyl tubing.

Catalyst: household Baking Soda - totally safe catalyst! Catalyst is the substance that helps the electricity separate water into HHO. Distilled water alone does not conduct electricity so nothing would happen without this material. Can be obtained cheaply at your grocery store.

You will have everything you need to successfully install, operate and fine-tune your system for maximum fuel economy - "Just Add Water!"