One Problem that can affect your carpet is furniture indentations. This is common when you have heavy furniture resting on the carpet. This problem, if severe, can not always be fully corrected but it can always be approved. One way to improve indentations is to place an ice cube in the dent. Let it slowly melt and swell the fiber hopefully removing the dent. You can also use a steamer to do the same job if you have one. Place the steamer on the carpet and let it loosen the fibers. Use a spoon or other dull instrument to help loosen the individual carpet fibers. Hopefully one of these two methods will work. If they do not you might have a permanent issue.

Another common problem is cigarette burns on a carpet. One solution to this problem is to have a carpet cleaner do a section repair on the damaged area. This can be expensive though and can sometimes be noticeable. A better option for you however might be to snip off the top of the fiber that is burnt. It will leave a low spot but it will look better than a burn. Use a good pair of scissors or a pair of nail clippers to cut the carpet fiber being careful only to remove the damaged section.

One final problem common to Berber carpets is a pulled loop. You have two choices when it comes to a pulled loop. You can either cut the loop to keep it from spreading or you can try to replace it. To replace it you will want to run a bead of hot glue in the hole and slowly weave the fiber back in to the carpet. Be careful not to burn yourself or get glue all over the carpet. The method you choose is up to you but do something or else the pulled loop or carpet fiber could spread all the way across your carpet.

Hopefully these tips have helped you. Carpet is not hard to live with but it is something you need to stay on top of. Good luck.