Consider Crowns for Decayed and Damaged Teeth

By: Patricia Woloch

If you have damaged or decayed teeth, your dentist may suggest to cap them. A crown, or cap, is used to cover a tooth that has a healthy root but is damaged above the gum line. Crowns are necessary when the damage or decay to your tooth is extensive enough that a filling cannot replace the missing tooth structure. A crown can also be used to support a filling when most of the tooth is worn down, seal a cracked tooth, cover discolored or disfigured teeth, or keep weak teeth from breaking.

Procedure

The crown procedure is a fairly simple one. Because teeth needing crowns are often damaged or decayed, a root canal may be necessary before the crown is placed. Not all who need a crown will need a root canal.

To place a crown, your dentist must first file down the damaged or decayed tooth to make room. Then a cord or piece of thread is used to push the gum down around the tooth and an impression of the tooth is taken. The impressions are sent to the lab where the crown is then made.

In the meantime, you can wear a temporary crown, usually made of plastic which will be removed during your next visit. Your dentist will test the permanent crown to make sure it fits and there is no discomfort, and then cement it to your tooth.

Placing a crown typically does not cause any post-procedure sensitivity or discomfort. If you do notice any when you bite down, you should call your dentist. The crown might be too high on the tooth, but this is easily fixed in the dentist's office.

If your crown chips or loosens, or if it comes completely out of your mouth, call your dentist to have it repaired. When done by a qualified cosmetic dentist and given good daily care, a crown will remain sturdy, attractive, and serviceable for at least 20 years.

? Gold - This is the classic metal crown, made from a gold alloy. Dentists have found over several decades that gold is an excellent metal to use due to its malleability and strength. This leads to precise fitting of the crown on the tooth and a long life. Gold does not chip and can withstand chewing and biting.

? Porcelain-fused-to-metal - these are a porcelain-metal hybrid. First a shell of metal is made to fit over the tooth, and then a veneer of porcelain is fused to the metal. They are a good choice for both front and back teeth and have both an aesthetic appeal and can withstand heavy bites. A dark line will eventually appear at the crown's edge between the tooth and gumline as the gums slowly recede with age.

? All-porcelain - These have become the standard for the placement of full crowns today. They combine strength and a natural appearance that matches porcelain-metal restorations. It is now possible to avoid the black line of porcelain-metal crowns by using all-porcelain. They last a long time and their natural look can perfectly match your existing teeth.

Top Searches on
Dental Surgery
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 
 • 

» More on Dental Surgery