Fine Tuning Bread Machine Recipes

Sometimes making bread in your bread machine can be tricky.

We were trying to help a customer whose bread did not rise enough. It seemed that he did everything right. Come to find out, he had an older model and a brand that we were not familiar with. (Bread machines are becoming more standardized but there are still different requirements for different machines.) So we tried to help him fine tune his bread to work perfectly with his machine.

Fine tuning may be required either because the recipe does not perfectly match the machine or because of environmental conditions in your kitchenâ€"humidity, temperature, or altitude. (Since temperature is a variable, make sure that both the mix and machine are at room temperature before beginning.)

Bread machines work on a timer. They mix, allow time for the bread to rise, and then bake. If the dough does not rise fast enough, then the loaf is dense with poor volume. If the dough rises too fast, it collapses with a depression in the middle. If your recipe does not work just right, it may be fine tuned to turn out the perfect bread. To do so, you want to adjust the rising so that it is at peak height when the baking cycle begins.

In fine tuning, there are two variables to work with. The first is hydration, the ratio of water to dry ingredients. A more hydrated dough is softer and will rise easier. If it is too firm, it won't rise enough and will be dense. If it is too soft, it will rise too quickly and collapse as baking begins. A little difference in the amount of water added will change the loaf so measure carefully your water with a reliable measuring cup designed for liquids.

Check the dough ball at the end of the kneading cycle. Poke it with your finger. It should be soft but not too sticky. If you think it is too soft or too firm, pull it out of the machine, form a loaf, let it rise, and bake it in the oven. Then next time, add or subtract water. Usually a one tablespoon adjustment is all that is needed.

The other method for fine tuning is adjusting the temperature of the water. All of our bread machine mixes are developed with water at 80 degrees and a specified water temperature range of 75 to 85 degrees. As a rule of thumb, if your kitchen is chilly, use water at 85 degrees. If hot, use water at 75 degrees.

Increasing or decreasing the water temperature will change the rate of the yeast growth substantially. So if the dough ball indicates the right consistency, then you can speed or retard the rising of the bread quite handily by adjusting the water temperature--warmer water will speed the rising and cooler water will slow the rising. Usually an adjustment of ten degrees is the most you will want to vary.

We hope this helps you fine tune your recipe for your bread machine and the conditions in your kitchen. Once you find what works, stick with it. Consistently turning out perfect loaves is usually no more difficult than carefully measuring the water and controlling water temperature.

Copyright 2003-2007, The Prepared Pantry ( ). Published by permission

Users Reading this article are also interested in:
Top Searches on Bread Recipe:
Bread Machine Bread Recipes Recipes For Bread Machine Bread
About The Author, Dennis Weaver -
Dennis Weaver is a baker, a recipe designer, and a writer. He has written many baking guides and How to Bake, a comprehensive baking and reference e-book--available free at The Prepared Pantry which sells baking and cooking supplies and has a free online baking library.