If you are looking for a washing machine, you may want to consider washing machine types such as top-loaders. Top-loaders which cost around $350 and more are user-friendly since users do not need to bend over when using them. As an alternative, why not also consider purchasing front-loaders which cost around $600 and more?

The great thing about this type is that 65% of energy will be saved and around 30% of water will be conserved because the basins that come with it do not need to be filled with water. However, keep in mind that the newly-released top-loaders which cost around $900 oppose the front-loaders which are energy efficient. It is important to look for the following factors:

Tip 1 # A washing machine that does not heat all the water contained in the machine.

Often times, people buying washing machines often do not care about whether the washing machine they are buying heats only the water it needs. This statement was said by Standards of Excellence manager John O' Meara. He stated further that nowadays, this feature has been very common in many washing machines. Most washing machines now has the feature of saving and conserving energy by heating not the entire water contained in the tank but only the water needed for the washing. Generally, the newly-released washing machines are much more efficient that the washing machines released in the past. This comment was made by Jill Notini from the Association of Home Appliance Manufacturers located in Washington D.C.

Tip 2 # A fast spin cycle.

If the spin cycle of a washing machine is fast, the faster it is to dry the clothes because more water is extracted from the spinner. According to www.applianceadvisor.com Alex Cheimets, it is very important that you look for a washing machine with a higher rpm or rotations per minute because it adds the energy that is being saved. A washing machine with 900 rpm is good and if you are looking for a machine that will help you save and conserve more energy, get a good pair of dryer and washing machine that comes with the moisture sensor. This shuts down the unit after detecting that the clothes are already dry.

Tip 3 # A machine that uses minimal amount of water.

According to Whirlpool spokesperson, Audrey Reed-Granger, the washing machines released in the past used 40 gallons of water for each cycle. If you would look at that for a year, you will arrive at over 14,000 gallon. It would be better to look for a washing machine that requires less than 14 gallons of water cycle consumption.

Tip 4 # Pedestals

Pedestals that cost around $100 up to $200 may now be installed in some washers and dryers. These pedestals are placed under the washing machine or dryer may be raised by one foot to make loading and unloading easier. There are also washers and dryers that already come with drawers used to stash bleach, stain-removal sticks and detergent.

Tip 5 # Extra rinse cycle

This is an additional option that you may opt to get. An extra rinse cycle allows the washing machine to dispense extra water while washing of clothes is ongoing. It a good way to remove stains and excessive detergent that may lead allergic people to sufferer especially babies however; the negative thing is that you may have to pay higher water bill.

A Piece of Advice:

Audrey Reed-Granger of Whirlpool noted that using spin cycle of a washing machine with a 1000 rpm shock-absorber free floor will make the floor shake but there is nothing to worry about this when used in a ground floor and basement because these machines are often reinforced.