Stair rods are the thin pieces of either metal or plastic that fit to the base of each stair riser to hold your staircase carpet runner in place. This not only protects the carpet and stops it from moving from position, but it also increases safety measures as people are less likely to fall or trip on carpet sections that have come loose from the stairs. You also have the added benefit of a decorative, attractive finish to your carpet, which adds charm and style to your staircase.



Even though stair carpets should be fitted with grippers to help avoid any movement in the carpet, stair rods form an extra means of securing your carpets, but they simply are not strong enough to form the only means of securing them.

Stair rods are available in several materials and several decorative finishes to suit any taste or decor. They range from various timbers or chrome finish to iron or brass, there are so many styles available that you will easily find one available to suit you and your home.

It is possible to order stair rods that are made to measure, but it is important that you get your initial measurements correct to ensure correct fitting and to avoid ending up with stair rods that are too short.

Most staircase carpets are fitted inside each stair riser, so you will need to measure not only the width of your carpet but also add extra length for the finial, or decorative end piece. This means the measurement you supply will be a tip-to-tip measurement from the end of one finial to the end of the other.

As stair rods are front fitted, this means you can add them to carpet runners or stairs that are completely carpeted.

When installing your stair rods you should mount the bracket firmly onto the staircase so that it sits directly alongside the edge of the carpet. It is recommended that you drill a pilot hole first for easier installation.

Attach the finials or decorative end pieces to the rods and secure them in place using small screws so they don't come off. Once both brackets are installed, lay the stair rod in the brackets being sure that the rod protrudes an equal distance from the bracket on each end. You should check that the rod overhangs the carpet runner an equal distance on each side, and then carefully screw the top half of the bracket to the bottom bracket piece to secure the stair rod in place.

If you are installing stair rods to fully carpeted stairs you may require longer screws to hold the brackets in place as the screw will need to go through the carpet and the underlay before it can grip to the stair riser.

Once your stair rods are installed, you should be able to enjoy a stylish accent to your staircase that not only looks great but is amazingly low maintenance. Stair rods don't require cleaning with cleaning products; simply wipe them with a clean cloth to maintain their protective lacquer coating and their fine finish.