Can the data from MobileMapper be post-processed?



You can purchase an option for the receiver to record the GPS measurements required for post-processing to sub-meter accuracy. After downloading this data together with data from a reference receiver to the PC, you use the current version of MobileMapper Office to perform differential correction. All existing MobileMapper receivers can be upgraded with this new option once they have been updated to receiver software version 6.00 or higher.No. Although the Garmin NavTalk Pilot GPS/Phone is classified in the handheld electronics portion of the Garmin dealer catalog, it still requires installation by a Garmin and Aircell dealer.

Where do I go to purchase a system?

MobileAngel GPS can be purchased through our network of authorized dealers and sales agents.

Can the data from MobileMapper be post-processed?

You can purchase an option for the receiver to record the GPS measurements required for post-processing to sub-meter accuracy. After downloading this data together with data from a reference receiver to the PC, you use the current version of MobileMapper Office to perform differential correction. All existing MobileMapper receivers can be upgraded with this new option once they have been updated to receiver software version 6.00 or higher.Inquire with your Dealer/Agent about the plan that is included with the purchase of your MobileAngel GPS device.

Will Meade incorporate a more advanced PEC system in this telescope than is currently provided?

MAX utilizes Meade's existing Sony GPS technology. For permanently mounted installations, GPS can be disabled. Meade offers an accessory for LNT scopes (Such as ETX Premier or LX90) that gets WWVB time from Colorado . Otherwise, the time is the same as the existing RCX scopes. Both RCX and MAX get accurate time from the GPS signal. It shows you the GPS time at start-up. Home | About Meade | Products Information | Dealer Locator | Meade Universe | Customer Support | Factory Outlet | Sky AssuranceYou can purchase an option for the receiver to record the GPS measurements required for post-processing to sub-meter accuracy. After downloading this data together with data from a reference receiver to the PC, you use the current version of MobileMapper Office to perform differential correction. All existing MobileMapper receivers can be upgraded with this new option once they have been updated to receiver software version 6.00 or higher.

What is the firmware version of my Clip-on?

Please take out the battery and find a serial No. in the Clip, LXXXXXXXX, and please send us a email () for us to check if your Clip-on is with 2.02 firmware version.

What is Differential GPS?

When the US defence department developed the GPS satellite system, it was meant for military applications - to help pinpoint the exact position of a soldier in the field, for example. That system is extremely accurate, within something like 50 feet. The DoD didn't want to give that capability to the enemy, so they scrambled that signal. The signal that's available to the public has been deliberately tweaked to provide a position within about 200 feet.The kits all come with marine grade Velcro (hook and loop fastener) material. This works very well for small flat devices that need to be removed often. (radar detector, cell phones, toll transponders, change holders, garage door openers and small hand-held GPS).