‘Exposing the Myths on Fuel Pump Compensators (Aneroid) added to After Market Turbo Systems and Myths of Dyno Tuning’



By Andrew Leimroth

(Andrew is one of “The Diesel Experts" see www.thedieselexperts.com and has personally fitted on average 2 or 3 turbos a week for the past 10 years. That’s thousands of tubos!)

The addition of Fuel Pump Compensators to enhance power with

After Market Turbo Systems:

There is quite a debate raging about Diesel Fuel Pump Modifications as people strive for more power than is standard from their After Market Turbo Charged 4WD! One of the main reasons driving this topic though is misinformation from diesel pump shops promising a large increase in power in addition to the gain obtained from the turbo! I have put our views below in point form.

ŸAn Aneroid is a $1000 to $1800 addition to the existing injection pump. It is solely classified by the component manufacturer as a ‘Pollution Control Device’ fitted to factory turbo diesels.

ŸContrary to this it is promoted by Diesel Injection shops as a performance device for after market turbo installations! What people don’t understand is that the same heavy fuel loadings obtainable with an Aneroid installed to a Diesel Injection Pump can also be obtained easily at no cost without it!!

ŸA correctly set up diesel injection system in conjunction with an After Market Turbo installation will perform nearly as well as the equivalent Factory Turbo vehicle. This is the way the After Market Turbo System has been developed and it should stay that way. The Turbo System should perform ’Stand Alone’ with no additions like large exhausts and fuel pump modifications.

ŸAn Aneroid fitted to the injection pump of an After Market Turbo diesel makes it magically outperform a factory turbo equivalent safely. The reason for this is obvious- ‘Over fuelling above the recommended levels UNSAFELY!’

ŸOver fuelling outside the Aftermarket Turbo System Manufacturers Specs may mean more power but this is unsafe for the engine.

ŸThe addition of an Aneroid to a fuel pump is not accepted by most aftermarket turbo manufacturers as it promotes over fuelling which in turn can create a huge reliability cloud over their product!

ŸA SERIOUS FACT! All After Market Turbo System Warranties become Void if a pump is modified outside the said After Market Manufactures specs! Just remember this if you have New Vehicle Warranty being covered by the After Market Turbo Manufacturer like DTS does. You will lose your coverage!

ŸThe usual argument by the pump shop trying to sell an Aneroid as an addition to a turbo installation is that the engine will run smoother and produce better efficiency. As we say it has no relation to smoothness and the efficiency phrase is a catch!

ŸOur biggest concern is, “What specification is the Aneroid set to?" Again the usual story given to a potential customer by the diesel pump shop is that it is set to factory fuel specs. For starters there are NO factory fuel specs for After Market Turbo installations supplied by either the Original Vehicle Manufacturer or the After Market Turbo Manufacturer. Secondly the fuel spec that the diesel pump shop usually is talking about is the Genuine Factory turbo specs for fuel loadings. This is a real worry as the Factory turbo is usually a completely different combustion system with much more durable pistons to cope with heavy fuel loadings. To set up an After Market Turbo to match these fuel loadings would lead to an obvious eventual outcome! A damaged engine. Unfortunately this damage is not short term. It happens over time and usually rears its ugly head gradually.

ŸThe only Specifications supplied by Turbo System manufacturers are Boost Pressure, Air/Fuel ratios and Exhaust Temperatures (No engine output figures are ever supplied)! These were obviously not developed with a Fuel Pump Aneroid and so could not accurately be used with one!

ŸAt the end of the day it is a fact that if the fuel loadings are kept within the After Market Turbo Manufacturers specifications via Boost and Exhaust readings you will not only keep your warranty (which will most likely become Void if an Aneroid is fitted) you will have your diesel engine for the long term!!

This leads to the next common area of misinformation: Dyno Tuning.

ŸA Dyno is a device used for measuring power output at the wheels.

ŸThey are a being pushed as a real ‘must have’ in the automotive scene of late as workshops compete for a selling edge. ‘If you don’t have one you must not know what you are doing’ is often the sales pitch used.

Ÿ The truth is that they are not a must have. The real fact is that they are required more by suburban workshops due to the fact that they have no real road test areas! And again the ‘Bells and Whistles’ must be good??

ŸReal on road driving experience with test gear (air/fuel ratio meter - boost gauge) attached to the 4WD is the only way to obtain a true indication of the real operating conditions. An example of this is looking at factory development of vehicles and race vehicle testing. At the end of the day it is km after km of road testing that seals the job.

Ÿ‘Smudging’ of dyno figures. Dyno figures can be smudged to give a false impression of gains. This is noted by us in the number of 4WD diesels we have seen through our workshop with impressive dyno figures but in the true world, ‘lack lustre’ performance! It is even admitted by Dyno manufacturers.

ŸAgain… no 4WD manufacturer or After Market Turbo manufacturer supplies rear wheel dyno figures to set things to. So question the workshop if they say they are setting the power output to a given figure. It might be well intentioned to set up a 4WD based on rear wheel output but identical 4WD diesel engines are slightly different from one to the next and even atmospheric conditions play a varying factor.

In summary it pays be educated in making decisions in life. The Diesel Experts are here to educate and have been for many years. We are not here to ‘knock’ products or services but to educate on the true facts so as you can make an informed decision! With the amount of misinformation out there on diesel and turbo charging diesels we feel obliged to inform you of the facts.

http://www.thedieselexperts.com

Andrew Leimroth of Berrima Diesel Service is one of “The Diesel Experts" see www.thedieselexperts.com and has personally fitted on average 2 or 3 turbos a week for the past 10 years. That’s thousands of tubos. Berrima Diesel Service are Australia's Leading Diesel Service Centre solving diesel problems and consulting to the automotive industry since 1956.